carbon
Carbon Fiber Gas Tank Dash Panel Cover for Harley 13-17 Street Bob FXDB FXDB/I
Posted on May 21st, 2023 by admin
100% Carbon Fiber Fuel Tank Panel Cover for Harley Davidson 13-17 Street Bob. Materials: 100% Carbon Fiber. Finish: Clear Painting Coat. Color: Carbon fiber black drawing. Place for installation: Gas/ Fuel Tank Panel Cover. Other Part: The Lock Mount is inside first. Fits Harley Davidson 13-17 Street Bob. Because the materials are flexible, but hard. Please adjust it a little first, and tighten the bolts finally. Before you decide to make an order, please read the notice below first! And then we will give you a best solution. And which is included packing box and all other accessories. You bought wrong size or wrong item. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Body & Frame\Fairings, Plastics & Body Kits”. The seller is “powerjamesmotor” and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.
- Brand: POWERJAMES
- Material: Carbon Fiber
- Type: Gauge Cover
- OE/OEM Part Number: 70900209
- Color: Carbon Fiber
- Manufacturer Part Number: 704041
- Placement on Vehicle: Front
- Manufacturer Warranty: 6 Months
- Items Included: Panel Cover
- Number of Pieces: 1
- Fit: Street Bob
Read More
Carbon Fiber Fairing Kit withTank Cover For Yamaha YZF R6 2008-2016 ABS Bodywork
Posted on May 18th, 2023 by admin
Condition: 100% Brand New Aftermarket Fairing, NON OEM. Material: High quality ABS plastic, good elasticity and heat tolerance, not easy to be cracked. Use same grade OEM bodywork fairing kit ABS raw material. Color: Aftermarket racing custom painted (as picture shows). Surface Finish: UV Painted. Paint job: High quality paint job with UV paint with 3 layers of clear coat to protect the paint job. Correct tabs and pre-drilled holes to ensure easy and quick installation. Installation: Highly Recommend Installed by Professional. Attention: Fairing Bolts & Installation instructions are not included. Advanced UV Light Solidification Technique for painting ; Compare with the ordinary painting, it is much higher in color saturation and lustrousness. After UV Process, it becomes much stronger in Abrasive resistance and chemical resistance. 1x Fairing Set (as picture shown, including tank cover). Buyers are responsible for those charges. We recommend that all custom aftermarket body kits and fairings be installed by a professional. Once installed properly, you will love the new look of your bike. For over 10 years, ZXMT has been leading the industry in the production of aftermarket motorcycle fairings and bodywork. Our company’s products are exported to all around the world, with the well-known manufacturers and distributors at home and abroad to establish a good relationship of cooperation. And we currently have over 60 sets of injection molds – far more than any other factory. We are committed to resolve all issues in a friendly and satisfactory manner. We will solve your problem during working time (except weekends and public holidays). If you do not get a response from us, then please check your junk or spam mailbox. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Body & Frame\Fairings, Plastics & Body Kits”. The seller is “supermotorfairing” and is located in this country: US. This item can be shipped to United States.
- Brand: ZXMT
- Manufacturer Part Number: Y0609
- Placement on Vehicle: Left, Right, Front, Rear
- Type: Fairing/Body Work Kit
- Fit: Custom Fit
- Material: ABS Plastic
- Mounting Holes: Pre-Drilled
- Finish: UV Painted
- Color: Aftermarket racing custom painted
- Manufacturer Warranty: 1 Year
- Number of Pieces: 25
- Fitment: For Yamaha YZF R6 2008-2016
- Molding: Injection Molded
- Fairing Bolts: Not Included
- Installation Instruction: Not Included
- Rear Seat Cover: Not Included
- Tank Cover: Included
Read More
Carbon Fiber Infusion Beginner How To
Posted on May 17th, 2023 by admin
Carbon Airbox Tank Cover Fit for Honda CB650R CBR650R 19-21 Twill Glossy ZA T8
Posted on May 16th, 2023 by admin
Grey Sun Visor Clip 8E0857562A fit for Audi A3 A4 A5 Q5 A7 B6 B7 B8 S4 S5 T08. Adjustable Aluminum Kickstand Fits Suzuki GSXR 600 750 2001-10 GSXR1000 BLK MT. 2X Low Mount Racing Bucket Seat Base Tensile Steel Bracket For Corvette C5 MT. Fuel Gas Tank Cap Fit For Kawasaki VN1500 Vulcan Drifter Classic Tourer 96-04 MT. Oil Drain Kit Fit For Yamaha Outboard 15 Hp – 150 Hp 4-stroke Motors 1994 + TC. Fuel Gas Tank Cap Cover Key Fit For Kawasaki VN400 800/1500 Vulcan Classic TC. Choke Lever Automatics Fits Arctic Cat ATV 04-06 650V2 01-03 500 400 0409-025 TC. 20L/30L Fuel Oil Container Petrol Cans Fit For Wrangler Toyota Accord Pajero MT. 43300 Pneumatic Fan Clutch Wrench Set Removal Tool Fit For Ford GM Chrysler T08. CARBURETOR CARB REPAIR REBUILD KIT Fits HONDA XL500 XL500S XL 500 S 79-82 80 T08. Universal Hatch Adjustable Aluminum GT Rear Trunk Wing Racing Spoiler B 13# MT. RV LADDER REPAIR KIT nuts Stainless Bunk Motorhome Parts Camper Trailer 6PCS TC. For 99-04 Ford Mustang Sn-95 Low Mount Racing/Bucket Seat Tensile Bracket MT. SAFE & SECURE SHOPPING. Enlarge Brake Lever Pedal. Front Fork Oil Seal. Carbon Airbox Tank Cover Fit for Honda CB650R CBR650R 19-21 Twill Glossy ZA T8. Carbon Airbox Tank Cover Protector Fit for Honda CB650R CBR650R 2019 2020 2021 Features: ABS plastic material manufactured. Lightweight & high strength. High rigidity & tensile strength & plain degree, high temperature resistance & the best gloss. Product surface is coated with anti UV ultraviolet, so that the transparent surface layer can be stay as bright as new. Prevent Bleaching from the sun. Easy Installation, instruction NOT included. My goal is to make sure you are a happy customer and pleasant shopping with us. International Buyers – Please Note. Thank you for your understanding. We stand behind everything that we sell and will do everything possible to assure you are satisfied. Buyers are responsible for the postal cost of returning the items. We must be notified of the intent to return your item within 30 days of receiving the item. How to return 1, Please ask us for return address. We strive to answer all questions and resolve any problems as quickly as possible. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Air Intake & Fuel Delivery\Fuel Tanks”. The seller is “topteng-08″ and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Brand: Topteng
- Color: Black
- Fit: Custom Fit
- Holes: Pre-Drilled
- Manufacturer Part Number: M508-B030-CBN
- Material: ABS Plastic
- MPN: M508-B030-CBN
- Number of Pieces: 1
- Placement on Vehicle: Front
- Surface Finish: Carbon Fiber
- Type: Airbox Tank Cover
- Warranty Terms: 6 Months
Read More
Carbon Fiber Valve Gauge 4500PSI High Pressure SCBA Paintball Air Tank Valve
Posted on May 14th, 2023 by admin
4500Psi SCBA Filling Station Charging Adapter Regulator Valve For PCP Air Tank. Stainless steel body, high pressure hose with spring protection wire, explosion-proof screw ensure safe filling. Carbon fiber bottle to vial standard filling system. Use the seismic pressure gauge, accurate standard, quality and durability. Filling station with max to 40MPa pressure gauge, included the O-rings apron attached. It is most economical high performance tank regulator large numbers and red, yellow and green read indicators for easy monitoring. Working pressure rated to 4500 PSI. Carbon fiber tank to vial standard adapter system, 8mm/0.32” quick disconnect male output directly into air cylinder, with standard high pressure port and quick refilling. 1 x scuba valve, 1 x G5/8 valve gauge, 1 x 8mm/0.32” quick disconnect hose. Air tank is not included. Need to compatible with threads of valves, using for high pressure air cylinder, SCBA cylinder, SCUBA diving steel cylinder or PCP tanks, easy to assemble and install for Air / CO2 filling. 4500Psi Scuba SCBA Valve + Regulator Fill Station Hose. 4500 psi fill pressure. Package size: 22cm x 14cm x 12cm (8.7” x 5.5” x 4.7”). Package weight: 1.7kg/3.8lbs. Inlet thread: M181.5. 1 x M181.5 Scuba Valve. 1 x G5/8 Valve Gauge Fill Station. 1 x 8mm Quick Disconnect Hose. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Scuba Diving Valve Filling Station. The Air Tank is not included. This item is in the category “Sporting Goods\Outdoor Sports\Paintball\Air Systems & Accessories\N2 Tanks & Accessories”. The seller is “rongvaluebuy” and is located in this country: US. This item can be shipped to United States, Poland, Netherlands, Slovakia, Slovenia, Sweden, Belgium, Italy, Republic of Croatia, Portugal, Austria, Bulgaria, Czech Republic, Greece, United Kingdom, Hungary, France, Denmark, Spain, Estonia, Monaco, Romania, Lithuania, Finland, Luxembourg, Germany, Latvia.
- Warranty: 2 Year
- Type: Scuba Diving Valve Filling Station
- Note: The Air Tank is not included
- Brand: Unbranded
- Thread: M18x1.5
Read More
Carbon Fiber Fuel Gas Tank Protector Cover Fit Kawasaki Ninja ZX10R 2011-2019 12
Posted on May 12th, 2023 by admin
Condition: 100% Brand New. Material: Real Carbon Fiber. Color: As Picture Shown. 1 PC Carbon Fiber Fuel Gas Tank Protector Pad. No installation instruction included. Is provided once the item is dispatched. Items must be in original box and kept in good condition. My goal is to make sure you are a happy customer and pleasant shopping with us. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Air Intake & Fuel Delivery\Fuel Tanks”. The seller is “good_easydeal” and is located in this country: CN. This item can be shipped worldwide.
- Brand: GZYF
- Country/Region of Manufacture: China
- Manufacturer Warranty: 60 Day
- Material: Carbon Fiber
- Placement on Vehicle: Front
- UPC: 612041486141
Read More
Carbon Fiber Valve G5/8 Valve Gauge Fill Station Hose For PCP Air Tank 4500Psi
Posted on May 12th, 2023 by admin
Stainless Steel Body, High Pressure Hose with Spring Protection Wire, Explosion-proof Screw Ensure Safe Filling. Carbon Fiber Bottle to Vial Standard Filling System. Use the Seismic Pressure Gauge, Accurate Standard, Quality and Durability. Filling Station with Max to 40mpa Pressure Gauge, Included the O-rings Apron Attached. It Is Most Economical High Performance Tank Regulator Large Numbers and Red, Yellow and Green Read Indicators for Easy Monitoring. Working Pressure Rated to 4500 Psi. Carbon Fiber Tank to Vial Standard Adapter System, 8mm/0.32” Quick Disconnect Male Output Directly into Air Cylinder, with Standard High Pressure Port and Quick Refilling. Carbon Fiber Valve + G5/8 Valve Gauge Fill Station+Hose For PCP Air Tank 4500Psi. 1 X Scuba Valve, 1 X G5/8 Valve Gauge, 1 X 8mm/0.32” Quick Disconnect Hose. Air Tank Is Not Included. Need to Compatible with Threads of Valves, Using for High Pressure Air Cylinder, Scba Cylinder, Scuba Diving Steel Cylinder or Pcp Tanks, Easy to Assemble and Install for Air / Co2 Filling. 4500psi Scuba Scba Valve + Regulator Fill Station Hose. 4500 Psi Fill Pressure. Package Size: 22cm X 14cm X 12cm (8.7” X 5.5” X 4.7”). Package Weight: 1.7kg/3.8lbs. Inlet Thread: M181.5. 1 X M181.5 Scuba Valve. 1 X G5/8 Valve Gauge Fill Station. 1 X 8mm Quick Disconnect Hose. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Sporting Goods\Outdoor Sports\Paintball\Air Systems & Accessories\N2 Tanks & Accessories”. The seller is “yiyibushe-4″ and is located in this country: US. This item can be shipped to United States.
- Features: Stable performance and high quality
- Manufacturer Warranty: 3 Years
- Tank Pressure: 4500 psi
- Type: Scuba Diving Valve Filling Station
- Note: The Air Tank is not included
- Brand: Unbranded
- Thread: M18x1.5
Read More
Carbon Fiber Valve Gauge High Pressure SCBA Paintball Air Tank Valve 4500 PSI
Posted on May 10th, 2023 by admin
Carbon Fiber Valve Gauge High Pressure SCBA Paintball Air Tank Valve 4500 PSI. HIGH QUALITY MATERIALSStainless steel body, high pressure hose with spring protection wire, explosion-proof screw ensure safe filling. Carbon fiber bottle to vial standard filling system. Use the seismic pressure gauge, accurate standard, quality and durability. 40MPA PRESSURE GAUGEFilling station with max to 40MPa pressure gauge, included the O-rings apron attached. It is most economical high performance tank regulator large numbers and red, yellow and green read indicators for easy monitoring. 4500PSI WORKING PRESSUREWorking pressure rated to 4500 PSI. Carbon fiber tank to vial standard adapter system, 8mm/0.32” quick disconnect male output directly into air cylinder, with standard high pressure port and quick refilling. PACKAGE CONTENTS 1 x scuba valve, 1 x G5/8 valve gauge, 1 x 8mm/0.32” quick disconnect hose. Air tank is not included. WIDE APPLICATIONNeed to compatible with threads of valves, using for high pressure air cylinder, SCBA cylinder, SCUBA diving steel cylinder or PCP tanks, easy to assemble and install for Air / CO2 filling. 4500Psi Scuba SCBA Valve + Regulator Fill Station Hose. 4500 psi fill pressure. Package size: 22cm x 14cm x 12cm (8.7” x 5.5” x 4.7”). Package weight: 1.7kg/3.8lbs. Inlet thread: M181.5. 1 x M181.5 Scuba Valve. 1 x G5/8 Valve Gauge Fill Station. 1 x 8mm Quick Disconnect Hose. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Sporting Goods\Outdoor Sports\Paintball\Air Systems & Accessories\N2 Tanks & Accessories”. The seller is “yiyibushe-3″ and is located in this country: US. This item can be shipped to United States, Poland, Netherlands, Slovakia, Slovenia, Sweden, Belgium, Italy, Republic of Croatia, Portugal, Austria, Bulgaria, Czech Republic, Greece, United Kingdom, Hungary, France, Denmark, Spain, Estonia, Monaco, Romania, Lithuania, Finland, Luxembourg, Germany, Latvia.
- Features: Fast shipping
- 子SKU价格: #N/A
- 需改价: 85
- 正确价格: 85
- Warranty: 5 Years
- * Feature *: Creative Design，Durable Material，Beautiful Appearance
- Feature 1: Easy installation,Convenient Use,Easy Operation
- Note:: Do not send to Brazil
- Bundle Description:: No
- shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
- Item location:: CA /NJ /Austell
- Transportation does not include:: canarias
- shipping notice：: Can not ship to Puerto Rico,Alaska/Hawaii
- Tank Pressure: 4500 psi
- Type: Scuba Diving Valve Filling Station
- Note: The Air Tank is not included
- Brand: Unbranded
- Thread: M18x1.5
Read More
Carbon Fiber Valve Gauge High Pressure Paintball Air Tank SCBA Valve M18x1.5
Posted on May 10th, 2023 by admin
Carbon Fiber Valve Gauge High Pressure Paintball Air Tank SCBA Valve M18x1.5. HIGH QUALITY MATERIALSStainless steel body, high pressure hose with spring protection wire, explosion-proof screw ensure safe filling. Carbon fiber bottle to vial standard filling system. Use the seismic pressure gauge, accurate standard, quality and durability. 40MPA PRESSURE GAUGEFilling station with max to 40MPa pressure gauge, included the O-rings apron attached. It is most economical high performance tank regulator large numbers and red, yellow and green read indicators for easy monitoring. 4500PSI WORKING PRESSUREWorking pressure rated to 4500 PSI. Carbon fiber tank to vial standard adapter system, 8mm/0.32” quick disconnect male output directly into air cylinder, with standard high pressure port and quick refilling. PACKAGE CONTENTS 1 x scuba valve, 1 x G5/8 valve gauge, 1 x 8mm/0.32” quick disconnect hose. Air tank is not included. WIDE APPLICATIONNeed to compatible with threads of valves, using for high pressure air cylinder, SCBA cylinder, SCUBA diving steel cylinder or PCP tanks, easy to assemble and install for Air / CO2 filling. 4500Psi Scuba SCBA Valve + Regulator Fill Station Hose. 4500 psi fill pressure. Package size: 22cm x 14cm x 12cm (8.7” x 5.5” x 4.7”). Package weight: 1.7kg/3.8lbs. Inlet thread: M181.5. 1 x M181.5 Scuba Valve. 1 x G5/8 Valve Gauge Fill Station. 1 x 8mm Quick Disconnect Hose. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Sporting Goods\Outdoor Sports\Paintball\Air Systems & Accessories\N2 Tanks & Accessories”. The seller is “ktndentalsupply” and is located in this country: US. This item can be shipped to United States.
- Feature 2: Special Fashion Design
- Features: Fast shipping
- Warranty: 5 Years
- * Feature *: Creative Design，Durable Material，Beautiful Appearance
- Note:: Do not send to Brazil
- Bundle Description:: No
- Item location:: CA /NJ /Austell
- Transportation does not include:: canarias
- shipping notice：: Can not ship to Puerto Rico,Alaska/Hawaii
- Tank Pressure: 4500 psi
- Type: Scuba Diving Valve Filling Station
- Note: The Air Tank is not included
- Brand: Unbranded
- Thread: M18x1.5
Read More
Carbon Fiber Valve Gauge High Pressure SCBA PCP Paintball Air Tank Valve 4500PSI
Posted on May 10th, 2023 by admin
Specifications: 4500 Psi Fill Pressure Stainless Oil-filled Gauge Full 15-Year Life M181.5 Threading Package Size: 22cm X 14cm X 12cm (8.7” X 5.5” X 4.7”) Package Weight: 1.7kg/3.8lbs Inlet Thread: M181.5 Outlet Thread: G5/8 Working Pressure: 4500psi=300bar=30mpa Package Includes: 1 X M181.5 Scuba Valve 1 X G5/8 Valve Gauge Fill Station 1 X 8mm Quick Disconnect Hose. Carbon Fiber Valve Gauge High Pressure SCBA PCP Paintball Air Tank Valve 4500PSI. Stainless Steel Body, High Pressure Hose with Spring Protection Wire, Explosion-proof Screw Ensure Safe Filling. Carbon Fiber Bottle to Vial Standard Filling System. Use the Seismic Pressure Gauge, Accurate Standard, Quality and Durability. Filling Station with Max to 40mpa Pressure Gauge, Included the O-rings Apron Attached. It Is Most Economical High Performance Tank Regulator Large Numbers and Red, Yellow and Green Read Indicators for Easy Monitoring. Working Pressure Rated to 4500 Psi. Carbon Fiber Tank to Vial Standard Adapter System, 8mm/0.32” Quick Disconnect Male Output Directly into Air Cylinder, with Standard High Pressure Port and Quick Refilling. 1 X Scuba Valve, 1 X G5/8 Valve Gauge, 1 X 8mm/0.32” Quick Disconnect Hose. Air Tank Is Not Included. Need to Compatible with Threads of Valves, Using for High Pressure Air Cylinder, Scba Cylinder, Scuba Diving Steel Cylinder or Pcp Tanks, Easy to Assemble and Install for Air / Co2 Filling. 4500psi Scuba Scba Valve + Regulator Fill Station Hose. 4500 Psi Fill Pressure. Package Size: 22cm X 14cm X 12cm (8.7” X 5.5” X 4.7”). Package Weight: 1.7kg/3.8lbs. Inlet Thread: M181.5. 1 X M181.5 Scuba Valve. 1 X G5/8 Valve Gauge Fill Station. 1 X 8mm Quick Disconnect Hose. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Sporting Goods\Outdoor Sports\Paintball\Air Systems & Accessories\N2 Tanks & Accessories”. The seller is “pinjishangwu02″ and is located in this country: US. This item can be shipped to United States.
- Tank Pressure: 4500 psi
- Type: Scuba Diving Valve Filling Station
- Note: The Air Tank is not included
- Brand: Unbranded
- Thread: M18x1.5
Read More