https://carbonfibercontainer.com Wed, 10 Jun 2026 06:05:55 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://carbonfibercontainer.com/2026/02/12/100-real-forged-carbon-fiber-tank-cover-extender-2015-2026-yamaha-yzf-r1/ https://carbonfibercontainer.com/2026/02/12/100-real-forged-carbon-fiber-tank-cover-extender-2015-2026-yamaha-yzf-r1/#comments Thu, 12 Feb 2026 15:18:43 +0000 https://carbonfibercontainer.com/2026/02/12/100-real-forged-carbon-fiber-tank-cover-extender-2015-2026-yamaha-yzf-r1/











TOP OF THE LINE QUALITY PURE 100% REAL FORGED CARBON FIBRE REAR HALF FULL GAS TANK EXTENDER. BEAUTIFUL UV GLOSS FINISH. INSTALLS USING 3M DOUBLE SIDED TAPE OR EPOXY GLUE (OR BOTH). EPOXY OR TAPE NOT INCLUDED. 1 FORGED CARBON FIBER TANK EXTENDER IN GLOSS FINISH. This very Complex and. Aggressive piece is Proudly made by Our experts at 1CARBON. With only the Highest Quality Forged Carbon Fibre. OUR PARTS ARE MADE IN THE 2X2 TWILL WEAVE (Exactly as shown on picture) WE HAVE A COMPLETE LINE OF PARTS FOR YOUR BIKE!!! PLEASE INQUIRE (be careful with cheap imitation sellers). YOUR BIKE WAS NOT MADE IN CHINA OR HONG KONG. Each of our parts goes through our signature line of processes which includes. Linear Dimension Pattern Layer Process (our signature patented process). Through this process, carbon fiber weaves are aligned, allowing for a perfectly straight-laminated carbon fiber piece. While most companies produce products with weave distortions and unevenness, we believe that each part HAS to look good cosmetically. Transfer Vacuum Infusion Process (T-VIP). We have perfected our resin-transferring methods to a fine degree, utilizing them differently according to a part’s weight and size. With this part-specific treatment process, a particular part only absorbs the precise amount of needed resins, making it a perfectly even weight. Thanks to our premiere process, parts never absorb excessive resins which can result in uneven weight distribution.

]]>











TOP OF THE LINE QUALITY PURE 100% REAL FORGED CARBON FIBRE REAR HALF FULL GAS TANK EXTENDER. BEAUTIFUL UV GLOSS FINISH. INSTALLS USING 3M DOUBLE SIDED TAPE OR EPOXY GLUE (OR BOTH). EPOXY OR TAPE NOT INCLUDED. 1 FORGED CARBON FIBER TANK EXTENDER IN GLOSS FINISH. This very Complex and. Aggressive piece is Proudly made by Our experts at 1CARBON. With only the Highest Quality Forged Carbon Fibre. OUR PARTS ARE MADE IN THE 2X2 TWILL WEAVE (Exactly as shown on picture) WE HAVE A COMPLETE LINE OF PARTS FOR YOUR BIKE!!! PLEASE INQUIRE (be careful with cheap imitation sellers). YOUR BIKE WAS NOT MADE IN CHINA OR HONG KONG. Each of our parts goes through our signature line of processes which includes. Linear Dimension Pattern Layer Process (our signature patented process). Through this process, carbon fiber weaves are aligned, allowing for a perfectly straight-laminated carbon fiber piece. While most companies produce products with weave distortions and unevenness, we believe that each part HAS to look good cosmetically. Transfer Vacuum Infusion Process (T-VIP). We have perfected our resin-transferring methods to a fine degree, utilizing them differently according to a part’s weight and size. With this part-specific treatment process, a particular part only absorbs the precise amount of needed resins, making it a perfectly even weight. Thanks to our premiere process, parts never absorb excessive resins which can result in uneven weight distribution.













TOP OF THE LINE QUALITY PURE 100% REAL FORGED CARBON FIBRE REAR HALF FULL GAS TANK EXTENDER. BEAUTIFUL UV GLOSS FINISH. INSTALLS USING 3M DOUBLE SIDED TAPE OR EPOXY GLUE (OR BOTH). EPOXY OR TAPE NOT INCLUDED. 1 FORGED CARBON FIBER TANK EXTENDER IN GLOSS FINISH. This very Complex and. Aggressive piece is Proudly made by Our experts at 1CARBON. With only the Highest Quality Forged Carbon Fibre. OUR PARTS ARE MADE IN THE 2X2 TWILL WEAVE (Exactly as shown on picture) WE HAVE A COMPLETE LINE OF PARTS FOR YOUR BIKE!!! PLEASE INQUIRE (be careful with cheap imitation sellers). YOUR BIKE WAS NOT MADE IN CHINA OR HONG KONG. Each of our parts goes through our signature line of processes which includes. Linear Dimension Pattern Layer Process (our signature patented process). Through this process, carbon fiber weaves are aligned, allowing for a perfectly straight-laminated carbon fiber piece. While most companies produce products with weave distortions and unevenness, we believe that each part HAS to look good cosmetically. Transfer Vacuum Infusion Process (T-VIP). We have perfected our resin-transferring methods to a fine degree, utilizing them differently according to a part’s weight and size. With this part-specific treatment process, a particular part only absorbs the precise amount of needed resins, making it a perfectly even weight. Thanks to our premiere process, parts never absorb excessive resins which can result in uneven weight distribution.

]]> https://carbonfibercontainer.com/2026/02/12/100-real-forged-carbon-fiber-tank-cover-extender-2015-2026-yamaha-yzf-r1/feed/ 0 https://carbonfibercontainer.com/2025/12/20/carbon-fiber-tank-cover-extender-fuel-fairing-kit-for-yamaha-r1-r1m-2015-2024/ https://carbonfibercontainer.com/2025/12/20/carbon-fiber-tank-cover-extender-fuel-fairing-kit-for-yamaha-r1-r1m-2015-2024/#comments Sun, 21 Dec 2025 04:22:45 +0000 https://carbonfibercontainer.com/2025/12/20/carbon-fiber-tank-cover-extender-fuel-fairing-kit-for-yamaha-r1-r1m-2015-2024/













Prepreg carbon fiber (Dry carbon). All our products are meticulously crafted from. 100% dry carbon fiber. Manufactured using advanced prepreg technology and autoclave curing process, they boast a far superior strength-to-weight ratio compared to traditional wet carbon fiber products. Light in texture, full in luster, and fadeless. Easy to install with excellent fit. Surface Treatment: Five-layer exclusive high-end dry carbon fiber technology. Formed by autoclave under high temperature and high pressure, it features high toughness and excellent high-temperature resistance. Developed based on 3D scanning of the actual vehicle, ensuring accurate positioning and a shape that highly fits the original vehicle. The carbon fiber material perfectly meets the needs of modification enthusiasts for lightweight performance and personalization. 100% Dry Carbon Fiber. Prepreg + Autoclave Curing. (Uniform resin distribution No air bubbles). Hand Lay-up + Vacuum Bag Curing. (Large fluctuation in resin content). (Resin content > 50%). Why Choose Our Carbon Fiber? 1.50-60% lighter than stock plastic item. Uniform resin distribution with no air bubbles. High-gloss UV protective finish resists yellowing. Precision fitment ensures easy installation. UNSURE IF IT’S COMPATIBLE? In-Stock Items:USA/EU (8-12 days) / Asia (5-7 days) / Others (7-10 days). Customized Parts:7-10 days for production + corresponding logistics time. Color can Weave be customized. We’ll reply ASAP, with a maximum response time of 8 hours. ®? Our professional customer service team will do our utmost to resolve your pre-sales and after-sales issues. If you are not sure whether it is compatible with your motorcycle or haven’t found your preferred accessories. Please let us know the year and model of your motorcycle, and it would be ideal to attach a photo. ®? Customise is available, Twill weave, Forged weave, Plain weave, Glossy or matte. ®? All the items: 100% Full 3k/5k/12K Carbon Fiber! ®? Including For BMW, Yamaha, Kawasaki, KTM, Suzuki, Honda, Aprilia and so on. ®? If you want any items that you didn’t see in my page, Please send pics of the item you want and let me know the year and model of your motor.

]]>













Prepreg carbon fiber (Dry carbon). All our products are meticulously crafted from. 100% dry carbon fiber. Manufactured using advanced prepreg technology and autoclave curing process, they boast a far superior strength-to-weight ratio compared to traditional wet carbon fiber products. Light in texture, full in luster, and fadeless. Easy to install with excellent fit. Surface Treatment: Five-layer exclusive high-end dry carbon fiber technology. Formed by autoclave under high temperature and high pressure, it features high toughness and excellent high-temperature resistance. Developed based on 3D scanning of the actual vehicle, ensuring accurate positioning and a shape that highly fits the original vehicle. The carbon fiber material perfectly meets the needs of modification enthusiasts for lightweight performance and personalization. 100% Dry Carbon Fiber. Prepreg + Autoclave Curing. (Uniform resin distribution No air bubbles). Hand Lay-up + Vacuum Bag Curing. (Large fluctuation in resin content). (Resin content > 50%). Why Choose Our Carbon Fiber? 1.50-60% lighter than stock plastic item. Uniform resin distribution with no air bubbles. High-gloss UV protective finish resists yellowing. Precision fitment ensures easy installation. UNSURE IF IT’S COMPATIBLE? In-Stock Items:USA/EU (8-12 days) / Asia (5-7 days) / Others (7-10 days). Customized Parts:7-10 days for production + corresponding logistics time. Color can Weave be customized. We’ll reply ASAP, with a maximum response time of 8 hours. ®? Our professional customer service team will do our utmost to resolve your pre-sales and after-sales issues. If you are not sure whether it is compatible with your motorcycle or haven’t found your preferred accessories. Please let us know the year and model of your motorcycle, and it would be ideal to attach a photo. ®? Customise is available, Twill weave, Forged weave, Plain weave, Glossy or matte. ®? All the items: 100% Full 3k/5k/12K Carbon Fiber! ®? Including For BMW, Yamaha, Kawasaki, KTM, Suzuki, Honda, Aprilia and so on. ®? If you want any items that you didn’t see in my page, Please send pics of the item you want and let me know the year and model of your motor.















Prepreg carbon fiber (Dry carbon). All our products are meticulously crafted from. 100% dry carbon fiber. Manufactured using advanced prepreg technology and autoclave curing process, they boast a far superior strength-to-weight ratio compared to traditional wet carbon fiber products. Light in texture, full in luster, and fadeless. Easy to install with excellent fit. Surface Treatment: Five-layer exclusive high-end dry carbon fiber technology. Formed by autoclave under high temperature and high pressure, it features high toughness and excellent high-temperature resistance. Developed based on 3D scanning of the actual vehicle, ensuring accurate positioning and a shape that highly fits the original vehicle. The carbon fiber material perfectly meets the needs of modification enthusiasts for lightweight performance and personalization. 100% Dry Carbon Fiber. Prepreg + Autoclave Curing. (Uniform resin distribution No air bubbles). Hand Lay-up + Vacuum Bag Curing. (Large fluctuation in resin content). (Resin content > 50%). Why Choose Our Carbon Fiber? 1.50-60% lighter than stock plastic item. Uniform resin distribution with no air bubbles. High-gloss UV protective finish resists yellowing. Precision fitment ensures easy installation. UNSURE IF IT’S COMPATIBLE? In-Stock Items:USA/EU (8-12 days) / Asia (5-7 days) / Others (7-10 days). Customized Parts:7-10 days for production + corresponding logistics time. Color can Weave be customized. We’ll reply ASAP, with a maximum response time of 8 hours. ®? Our professional customer service team will do our utmost to resolve your pre-sales and after-sales issues. If you are not sure whether it is compatible with your motorcycle or haven’t found your preferred accessories. Please let us know the year and model of your motorcycle, and it would be ideal to attach a photo. ®? Customise is available, Twill weave, Forged weave, Plain weave, Glossy or matte. ®? All the items: 100% Full 3k/5k/12K Carbon Fiber! ®? Including For BMW, Yamaha, Kawasaki, KTM, Suzuki, Honda, Aprilia and so on. ®? If you want any items that you didn’t see in my page, Please send pics of the item you want and let me know the year and model of your motor.

]]> https://carbonfibercontainer.com/2025/12/20/carbon-fiber-tank-cover-extender-fuel-fairing-kit-for-yamaha-r1-r1m-2015-2024/feed/ 0 https://carbonfibercontainer.com/2023/12/16/carbon-fiber-tank-cover-extender-2015-2016-17-2019-2020-2022-2023-yamaha-yzf-r1/ https://carbonfibercontainer.com/2023/12/16/carbon-fiber-tank-cover-extender-2015-2016-17-2019-2020-2022-2023-yamaha-yzf-r1/#comments Sat, 16 Dec 2023 18:32:51 +0000 https://carbonfibercontainer.com/2023/12/16/carbon-fiber-tank-cover-extender-2015-2016-17-2019-2020-2022-2023-yamaha-yzf-r1/








–1 CARBON FIBER TANK EXTENDER IN “V” CARBON AS SHOWN ON PICTURES. TOP OF THE LINE QUALITY PURE 100% REAL CARBON FIBRE REAR HALF FULL GAS TANK EXTENDER. Through this process, carbon fiber weaves are aligned, allowing for a perfectly straight-laminated carbon fiber piece.

]]>








–1 CARBON FIBER TANK EXTENDER IN “V” CARBON AS SHOWN ON PICTURES. TOP OF THE LINE QUALITY PURE 100% REAL CARBON FIBRE REAR HALF FULL GAS TANK EXTENDER. Through this process, carbon fiber weaves are aligned, allowing for a perfectly straight-laminated carbon fiber piece.










–1 CARBON FIBER TANK EXTENDER IN “V” CARBON AS SHOWN ON PICTURES. TOP OF THE LINE QUALITY PURE 100% REAL CARBON FIBRE REAR HALF FULL GAS TANK EXTENDER. Through this process, carbon fiber weaves are aligned, allowing for a perfectly straight-laminated carbon fiber piece.

]]> https://carbonfibercontainer.com/2023/12/16/carbon-fiber-tank-cover-extender-2015-2016-17-2019-2020-2022-2023-yamaha-yzf-r1/feed/ 0 https://carbonfibercontainer.com/2021/12/03/reactive-parts-honda-cbr1000rr-r-sp-carbon-fibre-tank-cover-extender-ver-2/ https://carbonfibercontainer.com/2021/12/03/reactive-parts-honda-cbr1000rr-r-sp-carbon-fibre-tank-cover-extender-ver-2/#comments Fri, 03 Dec 2021 12:55:05 +0000 https://carbonfibercontainer.com/2021/12/03/reactive-parts-honda-cbr1000rr-r-sp-carbon-fibre-tank-cover-extender-ver-2/


Reactive Parts Honda CBR1000RR-R / SP Carbon Fibre Tank Cover / Extender VER 2. Manufactured from Carbon Fibre, produced in Autoclave, the Honda CBR1000RR-R tank cover / extender offers additional support to the rider under braking, reducing pressure on the wrists and also maintains weight bias towards the rear of the bike, when compared to braking without support, load is transferred to the riders wrists, and onto the fork, reducing braking ability. This carbon fibre piece is based on the shape of the Honda Racing and adheres to the standard tank using 3m strips. It provides complete fuel tank protection and added knee support. Pre-preg carbon fiber construction cured via vacuum/autoclave. Vastly improves rider ergonomics, positioning, and control. Aids in staying in proper position during heavy braking. Simple installation via pre-applied 3M hi-bond tape. As used by riders/teams in MotoAmerica, WSB, BSB. Also used by teams at Isle of Man TT and Macau GP. REACTIVE PARTS Is The UK’s Leading Motorcycle Performance Parts Outlet Supplying Premium Equipment To Factory Racing Teams In MotoGP, World Superbikes & British Superbikes Since 2002 And In 2010 We Opened Our Doors To All Racers And Track-Dayers Alike. The Parts Once Only Available To The World’s Top Racing Teams, Are Now Available For All. These timescales may vary at very busy times and will make every effort to keep you informed in the unlikely event of a delay. Lost Packages If your goods have been declared as lost by the courier, a replacement will be dispatched as soon as possible. It is also vital that you send photos of the internal and external packaging as claims cannot be processed without this evidence. Any such charges must be paid by you; we have no control over these charges and cannot predict what they may be. HOW DO I RETURN A PRODUCT? Repackage your products Print off the return note that is emailed to you when you request the return and place it inside the package. We recommend using a tracked and signed for service as we cannot take responsibility for items not arriving back to us. WHAT IF MY ORDER IS INCORRECT OR FAULTY? The item “Reactive Parts Honda CBR1000RR-R / SP Carbon Fibre Tank Cover / Extender VER 2″ is in sale since Tuesday, September 28, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Tuning & Styling”. The seller is “reactive_parts” and is located in Hertfordshire. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Manufacturer Part Number: RPCBR1000RR_TEXTV2
• Brand: Reactive Parts

]]>


Reactive Parts Honda CBR1000RR-R / SP Carbon Fibre Tank Cover / Extender VER 2. Manufactured from Carbon Fibre, produced in Autoclave, the Honda CBR1000RR-R tank cover / extender offers additional support to the rider under braking, reducing pressure on the wrists and also maintains weight bias towards the rear of the bike, when compared to braking without support, load is transferred to the riders wrists, and onto the fork, reducing braking ability. This carbon fibre piece is based on the shape of the Honda Racing and adheres to the standard tank using 3m strips. It provides complete fuel tank protection and added knee support. Pre-preg carbon fiber construction cured via vacuum/autoclave. Vastly improves rider ergonomics, positioning, and control. Aids in staying in proper position during heavy braking. Simple installation via pre-applied 3M hi-bond tape. As used by riders/teams in MotoAmerica, WSB, BSB. Also used by teams at Isle of Man TT and Macau GP. REACTIVE PARTS Is The UK’s Leading Motorcycle Performance Parts Outlet Supplying Premium Equipment To Factory Racing Teams In MotoGP, World Superbikes & British Superbikes Since 2002 And In 2010 We Opened Our Doors To All Racers And Track-Dayers Alike. The Parts Once Only Available To The World’s Top Racing Teams, Are Now Available For All. These timescales may vary at very busy times and will make every effort to keep you informed in the unlikely event of a delay. Lost Packages If your goods have been declared as lost by the courier, a replacement will be dispatched as soon as possible. It is also vital that you send photos of the internal and external packaging as claims cannot be processed without this evidence. Any such charges must be paid by you; we have no control over these charges and cannot predict what they may be. HOW DO I RETURN A PRODUCT? Repackage your products Print off the return note that is emailed to you when you request the return and place it inside the package. We recommend using a tracked and signed for service as we cannot take responsibility for items not arriving back to us. WHAT IF MY ORDER IS INCORRECT OR FAULTY? The item “Reactive Parts Honda CBR1000RR-R / SP Carbon Fibre Tank Cover / Extender VER 2″ is in sale since Tuesday, September 28, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Tuning & Styling”. The seller is “reactive_parts” and is located in Hertfordshire. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Manufacturer Part Number: RPCBR1000RR_TEXTV2
• Brand: Reactive Parts

Reactive Parts Honda CBR1000RR-R / SP Carbon Fibre Tank Cover / Extender VER 2. Manufactured from Carbon Fibre, produced in Autoclave, the Honda CBR1000RR-R tank cover / extender offers additional support to the rider under braking, reducing pressure on the wrists and also maintains weight bias towards the rear of the bike, when compared to braking without support, load is transferred to the riders wrists, and onto the fork, reducing braking ability. This carbon fibre piece is based on the shape of the Honda Racing and adheres to the standard tank using 3m strips. It provides complete fuel tank protection and added knee support. Pre-preg carbon fiber construction cured via vacuum/autoclave. Vastly improves rider ergonomics, positioning, and control. Aids in staying in proper position during heavy braking. Simple installation via pre-applied 3M hi-bond tape. As used by riders/teams in MotoAmerica, WSB, BSB. Also used by teams at Isle of Man TT and Macau GP. REACTIVE PARTS Is The UK’s Leading Motorcycle Performance Parts Outlet Supplying Premium Equipment To Factory Racing Teams In MotoGP, World Superbikes & British Superbikes Since 2002 And In 2010 We Opened Our Doors To All Racers And Track-Dayers Alike. The Parts Once Only Available To The World’s Top Racing Teams, Are Now Available For All. These timescales may vary at very busy times and will make every effort to keep you informed in the unlikely event of a delay. Lost Packages If your goods have been declared as lost by the courier, a replacement will be dispatched as soon as possible. It is also vital that you send photos of the internal and external packaging as claims cannot be processed without this evidence. Any such charges must be paid by you; we have no control over these charges and cannot predict what they may be. HOW DO I RETURN A PRODUCT? Repackage your products Print off the return note that is emailed to you when you request the return and place it inside the package. We recommend using a tracked and signed for service as we cannot take responsibility for items not arriving back to us. WHAT IF MY ORDER IS INCORRECT OR FAULTY? The item “Reactive Parts Honda CBR1000RR-R / SP Carbon Fibre Tank Cover / Extender VER 2″ is in sale since Tuesday, September 28, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Tuning & Styling”. The seller is “reactive_parts” and is located in Hertfordshire. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Manufacturer Part Number: RPCBR1000RR_TEXTV2
• Brand: Reactive Parts

]]> https://carbonfibercontainer.com/2021/12/03/reactive-parts-honda-cbr1000rr-r-sp-carbon-fibre-tank-cover-extender-ver-2/feed/ 0 https://carbonfibercontainer.com/2021/10/28/2015-2016-2019-2020-2021-yamaha-yzf-r1-carbon-fiber-gas-tank-extender/ https://carbonfibercontainer.com/2021/10/28/2015-2016-2019-2020-2021-yamaha-yzf-r1-carbon-fiber-gas-tank-extender/#comments Thu, 28 Oct 2021 15:00:11 +0000 http://carbonfibercontainer.com/2021/10/28/2015-2016-2019-2020-2021-yamaha-yzf-r1-carbon-fiber-gas-tank-extender/













HALF PIECE ONLY INSTALLS USING 3M DOUBLE SIDED TAPE OR EPOXY GLUE –NOT INCLUDED. MADE WITH OUR UNIQUE “V” CARBON DESIGN, EXACTLY AS SHOWN ON PICTURES. This very CompleX and. Aggressive piece is Proudly made by Our experts at 1CARBON. With only the Highest Quality 3K Carbon Fibre. OUR PARTS ARE MADE IN THE 2X2 TWILL WEAVE (Exactly as shown on picture) WE HAVE A COMPLETE LINE OF PARTS FOR YOUR BIKE!!! PLEASE INQUIRE (be careful with cheap imitation sellers). YOUR BIKE WAS NOT MADE IN CHINA OR HONG KONG. Each of our parts goes through our signature line of processes which includes. Linear Dimension Pattern Layer Process (our signature patented process). Through this process, carbon fiber weaves are aligned, allowing for a perfectly straight-laminated carbon fiber piece. While most companies produce products with weave distortions and unevenness, we believe that each part HAS to look good cosmetically. Transfer Vacuum Infusion Process (T-VIP). We have perfected our resin-transferring methods to a fine degree, utilizing them differently according to a parts weight and size. With this part-specific treatment process, a particular part only absorbs the precise amount of needed resins, making it a perfectly even weight. Thanks to our premiere process, parts never absorb excessive resins which can result in uneven weight distribution. The item “2015-2016-2019-2020-2021 YAMAHA YZF R1 CARBON FIBER GAS TANK EXTENDER” is in sale since Thursday, August 26, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “1carbontech” and is located in San Diego, California. This item can be shipped to United States.

• Warranty: Yes
• Number of Pieces: 1
• Color: Black
• Manufacturer Part Number: 15R1EXTENDR
• Country of Manufacture: United States
• Material: Carbon Fiber
• Placement on Vehicle: Rear
• Fit: Universal Sport Bike Fit
• Brand: 1CARBONTECH
• Type: Rear Fairing
• Part Brand: 1CARBONTECH
• Holes: Pre-Drilled
• Surface Finish: GLOSS UV PROTECTED
• Country/Region of Manufacture: United States

]]>













HALF PIECE ONLY INSTALLS USING 3M DOUBLE SIDED TAPE OR EPOXY GLUE –NOT INCLUDED. MADE WITH OUR UNIQUE “V” CARBON DESIGN, EXACTLY AS SHOWN ON PICTURES. This very CompleX and. Aggressive piece is Proudly made by Our experts at 1CARBON. With only the Highest Quality 3K Carbon Fibre. OUR PARTS ARE MADE IN THE 2X2 TWILL WEAVE (Exactly as shown on picture) WE HAVE A COMPLETE LINE OF PARTS FOR YOUR BIKE!!! PLEASE INQUIRE (be careful with cheap imitation sellers). YOUR BIKE WAS NOT MADE IN CHINA OR HONG KONG. Each of our parts goes through our signature line of processes which includes. Linear Dimension Pattern Layer Process (our signature patented process). Through this process, carbon fiber weaves are aligned, allowing for a perfectly straight-laminated carbon fiber piece. While most companies produce products with weave distortions and unevenness, we believe that each part HAS to look good cosmetically. Transfer Vacuum Infusion Process (T-VIP). We have perfected our resin-transferring methods to a fine degree, utilizing them differently according to a parts weight and size. With this part-specific treatment process, a particular part only absorbs the precise amount of needed resins, making it a perfectly even weight. Thanks to our premiere process, parts never absorb excessive resins which can result in uneven weight distribution. The item “2015-2016-2019-2020-2021 YAMAHA YZF R1 CARBON FIBER GAS TANK EXTENDER” is in sale since Thursday, August 26, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “1carbontech” and is located in San Diego, California. This item can be shipped to United States.

• Warranty: Yes
• Number of Pieces: 1
• Color: Black
• Manufacturer Part Number: 15R1EXTENDR
• Country of Manufacture: United States
• Material: Carbon Fiber
• Placement on Vehicle: Rear
• Fit: Universal Sport Bike Fit
• Brand: 1CARBONTECH
• Type: Rear Fairing
• Part Brand: 1CARBONTECH
• Holes: Pre-Drilled
• Surface Finish: GLOSS UV PROTECTED
• Country/Region of Manufacture: United States

HALF PIECE ONLY INSTALLS USING 3M DOUBLE SIDED TAPE OR EPOXY GLUE –NOT INCLUDED. MADE WITH OUR UNIQUE “V” CARBON DESIGN, EXACTLY AS SHOWN ON PICTURES. This very CompleX and. Aggressive piece is Proudly made by Our experts at 1CARBON. With only the Highest Quality 3K Carbon Fibre. OUR PARTS ARE MADE IN THE 2X2 TWILL WEAVE (Exactly as shown on picture) WE HAVE A COMPLETE LINE OF PARTS FOR YOUR BIKE!!! PLEASE INQUIRE (be careful with cheap imitation sellers). YOUR BIKE WAS NOT MADE IN CHINA OR HONG KONG. Each of our parts goes through our signature line of processes which includes. Linear Dimension Pattern Layer Process (our signature patented process). Through this process, carbon fiber weaves are aligned, allowing for a perfectly straight-laminated carbon fiber piece. While most companies produce products with weave distortions and unevenness, we believe that each part HAS to look good cosmetically. Transfer Vacuum Infusion Process (T-VIP). We have perfected our resin-transferring methods to a fine degree, utilizing them differently according to a parts weight and size. With this part-specific treatment process, a particular part only absorbs the precise amount of needed resins, making it a perfectly even weight. Thanks to our premiere process, parts never absorb excessive resins which can result in uneven weight distribution. The item “2015-2016-2019-2020-2021 YAMAHA YZF R1 CARBON FIBER GAS TANK EXTENDER” is in sale since Thursday, August 26, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “1carbontech” and is located in San Diego, California. This item can be shipped to United States.

• Warranty: Yes
• Number of Pieces: 1
• Color: Black
• Manufacturer Part Number: 15R1EXTENDR
• Country of Manufacture: United States
• Material: Carbon Fiber
• Placement on Vehicle: Rear
• Fit: Universal Sport Bike Fit
• Brand: 1CARBONTECH
• Type: Rear Fairing
• Part Brand: 1CARBONTECH
• Holes: Pre-Drilled
• Surface Finish: GLOSS UV PROTECTED
• Country/Region of Manufacture: United States

]]> https://carbonfibercontainer.com/2021/10/28/2015-2016-2019-2020-2021-yamaha-yzf-r1-carbon-fiber-gas-tank-extender/feed/ 0 https://carbonfibercontainer.com/2021/08/17/dry-carbon-fiber-tank-shroud-extender-for-2015-2020-yamaha-r1r1mr1s-2/ https://carbonfibercontainer.com/2021/08/17/dry-carbon-fiber-tank-shroud-extender-for-2015-2020-yamaha-r1r1mr1s-2/#comments Tue, 17 Aug 2021 08:24:57 +0000 http://carbonfibercontainer.com/2021/08/17/dry-carbon-fiber-tank-shroud-extender-for-2015-2020-yamaha-r1r1mr1s-2/







Yamaha R1 Carbon Fiber Tank Shroud Extender. Fit: 2015,2016,2017,2018,2019,2020 Yamaha R1/R1M/R1S. EASY INSTALLATION with 3M TAPE. Note: This is made from Pre-preg carbon (DRY Carbon), which is lighter and better than regular wet carbon (hand laying resin). The item “DRY Carbon Fiber Tank Shroud Extender For 2015-2020 Yamaha R1/R1M/R1S” is in sale since Tuesday, April 20, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “hi3nbui” and is located in Cleveland, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: Yamaha
• Fit: Custom Fit
• Type: Fairing/Body Work Kit
• Color: Black
• Manufacturer Part Number: Does Not Apply
• Material: Carbon Fiber

]]>







Yamaha R1 Carbon Fiber Tank Shroud Extender. Fit: 2015,2016,2017,2018,2019,2020 Yamaha R1/R1M/R1S. EASY INSTALLATION with 3M TAPE. Note: This is made from Pre-preg carbon (DRY Carbon), which is lighter and better than regular wet carbon (hand laying resin). The item “DRY Carbon Fiber Tank Shroud Extender For 2015-2020 Yamaha R1/R1M/R1S” is in sale since Tuesday, April 20, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “hi3nbui” and is located in Cleveland, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: Yamaha
• Fit: Custom Fit
• Type: Fairing/Body Work Kit
• Color: Black
• Manufacturer Part Number: Does Not Apply
• Material: Carbon Fiber

Yamaha R1 Carbon Fiber Tank Shroud Extender. Fit: 2015,2016,2017,2018,2019,2020 Yamaha R1/R1M/R1S. EASY INSTALLATION with 3M TAPE. Note: This is made from Pre-preg carbon (DRY Carbon), which is lighter and better than regular wet carbon (hand laying resin). The item “DRY Carbon Fiber Tank Shroud Extender For 2015-2020 Yamaha R1/R1M/R1S” is in sale since Tuesday, April 20, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “hi3nbui” and is located in Cleveland, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: Yamaha
• Fit: Custom Fit
• Type: Fairing/Body Work Kit
• Color: Black
• Manufacturer Part Number: Does Not Apply
• Material: Carbon Fiber

]]> https://carbonfibercontainer.com/2021/08/17/dry-carbon-fiber-tank-shroud-extender-for-2015-2020-yamaha-r1r1mr1s-2/feed/ 0 https://carbonfibercontainer.com/2021/03/24/reactive-parts-kawasaki-zx10-r-11-15-16-19-carbon-fibre-tank-cover-extender/ https://carbonfibercontainer.com/2021/03/24/reactive-parts-kawasaki-zx10-r-11-15-16-19-carbon-fibre-tank-cover-extender/#comments Wed, 24 Mar 2021 16:35:20 +0000 http://carbonfibercontainer.com/2021/03/24/reactive-parts-kawasaki-zx10-r-11-15-16-19-carbon-fibre-tank-cover-extender/





Reactive Parts Kawasaki ZX10-R 11-15 / 16-19 Carbon Fibre Tank Cover / Extender VER 2. Manufactured from F1 spec Carbon Fibre & produced in autoclave, the Kawasaki ZX10-R Tank Cover/ Extender offers additional support to the rider under braking, reducing pressure on the wrists and also maintains weight bias towards the rear of the bike. When compared to braking without support load is transferred to the rider’s wrists and onto the fork which reduces braking efficiency. This carbon fibre piece is based on the shape of the Kawasaki Racing WSBK factory tank and adheres to the standard tank using 3m strips. It provides complete fuel tank protection and added knee support. Pre-preg carbon fibre construction cured via vacuum/autoclave. Vastly improves rider ergonomics, positioning, and control. Aids in staying in proper position during heavy braking. Simple installation via pre-applied 3M hi-bond tape. As used by riders/teams in WSB, BSB, & MotoAmerica, – and by Road Racing teams at Isle of Man TT and Macau GP. REACTIVE PARTS Is The UK’s Leading Motorcycle Performance Parts Outlet Supplying Premium Equipment To Factory Racing Teams In MotoGP, World Superbikes & British Superbikes Since 2002 And In 2010 We Opened Our Doors To All Racers And Track-Dayers Alike. The Parts Once Only Available To The World’s Top Racing Teams, Are Now Available For All. These timescales may vary at very busy times and will make every effort to keep you informed in the unlikely event of a delay. Lost Packages If your goods have been declared as lost by the courier, a replacement will be dispatched as soon as possible. It is also vital that you send photos of the internal and external packaging as claims cannot be processed without this evidence. Any such charges must be paid by you; we have no control over these charges and cannot predict what they may be. HOW DO I RETURN A PRODUCT? Repackage your products Print off the return note that is emailed to you when you request the return and place it inside the package. We recommend using a tracked and signed for service as we cannot take responsibility for items not arriving back to us. WHAT IF MY ORDER IS INCORRECT OR FAULTY? The item “Reactive Parts Kawasaki ZX10-R 11-15 / 16-19 Carbon Fibre Tank Cover / Extender” is in sale since Tuesday, August 13, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Tuning & Styling”. The seller is “reactive_parts” and is located in Hertfordshire. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Brand: Reactive Parts
• Part Type: Bodywork & Frame Parts
• Manufacturer Part Number: RP_ZX10_TANKEXTEND_11_V2
• Product Type: Carbon Fibre
• Reference OE/OEM Number: RP_ZX10_TANKEXTEND_11_V2
• Classic Motorcycle Part: No

]]>





Reactive Parts Kawasaki ZX10-R 11-15 / 16-19 Carbon Fibre Tank Cover / Extender VER 2. Manufactured from F1 spec Carbon Fibre & produced in autoclave, the Kawasaki ZX10-R Tank Cover/ Extender offers additional support to the rider under braking, reducing pressure on the wrists and also maintains weight bias towards the rear of the bike. When compared to braking without support load is transferred to the rider’s wrists and onto the fork which reduces braking efficiency. This carbon fibre piece is based on the shape of the Kawasaki Racing WSBK factory tank and adheres to the standard tank using 3m strips. It provides complete fuel tank protection and added knee support. Pre-preg carbon fibre construction cured via vacuum/autoclave. Vastly improves rider ergonomics, positioning, and control. Aids in staying in proper position during heavy braking. Simple installation via pre-applied 3M hi-bond tape. As used by riders/teams in WSB, BSB, & MotoAmerica, – and by Road Racing teams at Isle of Man TT and Macau GP. REACTIVE PARTS Is The UK’s Leading Motorcycle Performance Parts Outlet Supplying Premium Equipment To Factory Racing Teams In MotoGP, World Superbikes & British Superbikes Since 2002 And In 2010 We Opened Our Doors To All Racers And Track-Dayers Alike. The Parts Once Only Available To The World’s Top Racing Teams, Are Now Available For All. These timescales may vary at very busy times and will make every effort to keep you informed in the unlikely event of a delay. Lost Packages If your goods have been declared as lost by the courier, a replacement will be dispatched as soon as possible. It is also vital that you send photos of the internal and external packaging as claims cannot be processed without this evidence. Any such charges must be paid by you; we have no control over these charges and cannot predict what they may be. HOW DO I RETURN A PRODUCT? Repackage your products Print off the return note that is emailed to you when you request the return and place it inside the package. We recommend using a tracked and signed for service as we cannot take responsibility for items not arriving back to us. WHAT IF MY ORDER IS INCORRECT OR FAULTY? The item “Reactive Parts Kawasaki ZX10-R 11-15 / 16-19 Carbon Fibre Tank Cover / Extender” is in sale since Tuesday, August 13, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Tuning & Styling”. The seller is “reactive_parts” and is located in Hertfordshire. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Brand: Reactive Parts
• Part Type: Bodywork & Frame Parts
• Manufacturer Part Number: RP_ZX10_TANKEXTEND_11_V2
• Product Type: Carbon Fibre
• Reference OE/OEM Number: RP_ZX10_TANKEXTEND_11_V2
• Classic Motorcycle Part: No

Reactive Parts Kawasaki ZX10-R 11-15 / 16-19 Carbon Fibre Tank Cover / Extender VER 2. Manufactured from F1 spec Carbon Fibre & produced in autoclave, the Kawasaki ZX10-R Tank Cover/ Extender offers additional support to the rider under braking, reducing pressure on the wrists and also maintains weight bias towards the rear of the bike. When compared to braking without support load is transferred to the rider’s wrists and onto the fork which reduces braking efficiency. This carbon fibre piece is based on the shape of the Kawasaki Racing WSBK factory tank and adheres to the standard tank using 3m strips. It provides complete fuel tank protection and added knee support. Pre-preg carbon fibre construction cured via vacuum/autoclave. Vastly improves rider ergonomics, positioning, and control. Aids in staying in proper position during heavy braking. Simple installation via pre-applied 3M hi-bond tape. As used by riders/teams in WSB, BSB, & MotoAmerica, – and by Road Racing teams at Isle of Man TT and Macau GP. REACTIVE PARTS Is The UK’s Leading Motorcycle Performance Parts Outlet Supplying Premium Equipment To Factory Racing Teams In MotoGP, World Superbikes & British Superbikes Since 2002 And In 2010 We Opened Our Doors To All Racers And Track-Dayers Alike. The Parts Once Only Available To The World’s Top Racing Teams, Are Now Available For All. These timescales may vary at very busy times and will make every effort to keep you informed in the unlikely event of a delay. Lost Packages If your goods have been declared as lost by the courier, a replacement will be dispatched as soon as possible. It is also vital that you send photos of the internal and external packaging as claims cannot be processed without this evidence. Any such charges must be paid by you; we have no control over these charges and cannot predict what they may be. HOW DO I RETURN A PRODUCT? Repackage your products Print off the return note that is emailed to you when you request the return and place it inside the package. We recommend using a tracked and signed for service as we cannot take responsibility for items not arriving back to us. WHAT IF MY ORDER IS INCORRECT OR FAULTY? The item “Reactive Parts Kawasaki ZX10-R 11-15 / 16-19 Carbon Fibre Tank Cover / Extender” is in sale since Tuesday, August 13, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Tuning & Styling”. The seller is “reactive_parts” and is located in Hertfordshire. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Brand: Reactive Parts
• Part Type: Bodywork & Frame Parts
• Manufacturer Part Number: RP_ZX10_TANKEXTEND_11_V2
• Product Type: Carbon Fibre
• Reference OE/OEM Number: RP_ZX10_TANKEXTEND_11_V2
• Classic Motorcycle Part: No

]]> https://carbonfibercontainer.com/2021/03/24/reactive-parts-kawasaki-zx10-r-11-15-16-19-carbon-fibre-tank-cover-extender/feed/ 0 https://carbonfibercontainer.com/2021/02/14/dry-carbon-fiber-tank-shroud-extender-for-2015-2020-yamaha-r1r1mr1s/ https://carbonfibercontainer.com/2021/02/14/dry-carbon-fiber-tank-shroud-extender-for-2015-2020-yamaha-r1r1mr1s/#comments Mon, 15 Feb 2021 04:19:45 +0000 http://carbonfibercontainer.com/2021/02/14/dry-carbon-fiber-tank-shroud-extender-for-2015-2020-yamaha-r1r1mr1s/







Yamaha R1 Carbon Fiber Tank Shroud Extender. Fit: 2015,2016,2017,2018,2019,2020 Yamaha R1/R1M/R1S. EASY INSTALLATION with 3M TAPE. Note: This is made from Pre-preg carbon (DRY Carbon), which is lighter and better than regular wet carbon (hand laying resin). The item “DRY Carbon Fiber Tank Shroud Extender For 2015-2020 Yamaha R1/R1M/R1S” is in sale since Sunday, February 7, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “hi3nbui” and is located in Cleveland, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: Yamaha
• Material: Carbon Fiber
• Type: Fairing/Body Work Kit
• Fit: Custom Fit
• Color: Black

]]>







Yamaha R1 Carbon Fiber Tank Shroud Extender. Fit: 2015,2016,2017,2018,2019,2020 Yamaha R1/R1M/R1S. EASY INSTALLATION with 3M TAPE. Note: This is made from Pre-preg carbon (DRY Carbon), which is lighter and better than regular wet carbon (hand laying resin). The item “DRY Carbon Fiber Tank Shroud Extender For 2015-2020 Yamaha R1/R1M/R1S” is in sale since Sunday, February 7, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “hi3nbui” and is located in Cleveland, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: Yamaha
• Material: Carbon Fiber
• Type: Fairing/Body Work Kit
• Fit: Custom Fit
• Color: Black

Yamaha R1 Carbon Fiber Tank Shroud Extender. Fit: 2015,2016,2017,2018,2019,2020 Yamaha R1/R1M/R1S. EASY INSTALLATION with 3M TAPE. Note: This is made from Pre-preg carbon (DRY Carbon), which is lighter and better than regular wet carbon (hand laying resin). The item “DRY Carbon Fiber Tank Shroud Extender For 2015-2020 Yamaha R1/R1M/R1S” is in sale since Sunday, February 7, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “hi3nbui” and is located in Cleveland, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: Yamaha
• Material: Carbon Fiber
• Type: Fairing/Body Work Kit
• Fit: Custom Fit
• Color: Black

]]> https://carbonfibercontainer.com/2021/02/14/dry-carbon-fiber-tank-shroud-extender-for-2015-2020-yamaha-r1r1mr1s/feed/ 0 https://carbonfibercontainer.com/2020/12/21/yamaha-r1-carbon-fiber-full-tank-extender-cover-wsbk-shroud-extender/ https://carbonfibercontainer.com/2020/12/21/yamaha-r1-carbon-fiber-full-tank-extender-cover-wsbk-shroud-extender/#comments Mon, 21 Dec 2020 20:51:41 +0000 http://carbonfibercontainer.com/2020/12/21/yamaha-r1-carbon-fiber-full-tank-extender-cover-wsbk-shroud-extender/







Yamaha R1 2015 Carbon Fiber Full Tank Extender Cover WSBK Shroud Extender. This Tank Cover with a higher tank narrow gives you a better grip when braking hard. The perfect accessory for a track bike. Fits Yamaha R1 2015+. Fits the following Bikes. Available in Matt and Glossy Finish. You can also choose between Twill, Plain, and Forged Carbon Weave. Please be notified that OEM BMW Carbon is Twill Weave with a Glossy Finish. All our Carbon Fiber products are made by DryCarbon Fiber and have a UV-Protection Coat. If you want to learn more about our Carbon. The item “Yamaha R1 Carbon Fiber Full Tank Extender Cover WSBK Shroud Extender” is in sale since Friday, October 9, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “rpm-carbon” and is located in TH. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Brand: RPM Carbon
• Manufacturer Part Number: ced-32223618728033

]]>







Yamaha R1 2015 Carbon Fiber Full Tank Extender Cover WSBK Shroud Extender. This Tank Cover with a higher tank narrow gives you a better grip when braking hard. The perfect accessory for a track bike. Fits Yamaha R1 2015+. Fits the following Bikes. Available in Matt and Glossy Finish. You can also choose between Twill, Plain, and Forged Carbon Weave. Please be notified that OEM BMW Carbon is Twill Weave with a Glossy Finish. All our Carbon Fiber products are made by DryCarbon Fiber and have a UV-Protection Coat. If you want to learn more about our Carbon. The item “Yamaha R1 Carbon Fiber Full Tank Extender Cover WSBK Shroud Extender” is in sale since Friday, October 9, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “rpm-carbon” and is located in TH. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Brand: RPM Carbon
• Manufacturer Part Number: ced-32223618728033

Yamaha R1 2015 Carbon Fiber Full Tank Extender Cover WSBK Shroud Extender. This Tank Cover with a higher tank narrow gives you a better grip when braking hard. The perfect accessory for a track bike. Fits Yamaha R1 2015+. Fits the following Bikes. Available in Matt and Glossy Finish. You can also choose between Twill, Plain, and Forged Carbon Weave. Please be notified that OEM BMW Carbon is Twill Weave with a Glossy Finish. All our Carbon Fiber products are made by DryCarbon Fiber and have a UV-Protection Coat. If you want to learn more about our Carbon. The item “Yamaha R1 Carbon Fiber Full Tank Extender Cover WSBK Shroud Extender” is in sale since Friday, October 9, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “rpm-carbon” and is located in TH. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Brand: RPM Carbon
• Manufacturer Part Number: ced-32223618728033

]]> https://carbonfibercontainer.com/2020/12/21/yamaha-r1-carbon-fiber-full-tank-extender-cover-wsbk-shroud-extender/feed/ 0 https://carbonfibercontainer.com/2020/12/17/yamaha-yzf-r1-r1m-r1s-aftermarket-carbon-fiber-gas-tank-cover-extender-e3/ https://carbonfibercontainer.com/2020/12/17/yamaha-yzf-r1-r1m-r1s-aftermarket-carbon-fiber-gas-tank-cover-extender-e3/#comments Fri, 18 Dec 2020 02:15:55 +0000 http://carbonfibercontainer.com/2020/12/17/yamaha-yzf-r1-r1m-r1s-aftermarket-carbon-fiber-gas-tank-cover-extender-e3/










Yamaha Yzf R1 R1m R1s Aftermarket Carbon Fiber Gas Tank Fuel Cover Fairing Extender E3 This gas tank fairing is in good condition with only some minor cosmetic flaws. The tabs are still intact so it will mount like it should. This gas tank fairing has deep scratches. This gas tank fairing has light scratches. Removed From: 2016 Yamaha YZF R1 — with Unknown miles Please review all pictures to asses the condition of the item. The item “Yamaha Yzf R1 R1m R1s Aftermarket Carbon Fiber Gas Tank Cover Extender E3″ is in sale since Thursday, November 5, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “bobbleheadmoto” and is located in Falling Waters, West Virginia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Russian federation, Cayman islands.

• Type: gas tank fairing
• Manufacturer Part Number: Does Not Apply
• Brand: AFTERMARKET

]]>










Yamaha Yzf R1 R1m R1s Aftermarket Carbon Fiber Gas Tank Fuel Cover Fairing Extender E3 This gas tank fairing is in good condition with only some minor cosmetic flaws. The tabs are still intact so it will mount like it should. This gas tank fairing has deep scratches. This gas tank fairing has light scratches. Removed From: 2016 Yamaha YZF R1 — with Unknown miles Please review all pictures to asses the condition of the item. The item “Yamaha Yzf R1 R1m R1s Aftermarket Carbon Fiber Gas Tank Cover Extender E3″ is in sale since Thursday, November 5, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “bobbleheadmoto” and is located in Falling Waters, West Virginia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Russian federation, Cayman islands.

• Type: gas tank fairing
• Manufacturer Part Number: Does Not Apply
• Brand: AFTERMARKET

Yamaha Yzf R1 R1m R1s Aftermarket Carbon Fiber Gas Tank Fuel Cover Fairing Extender E3 This gas tank fairing is in good condition with only some minor cosmetic flaws. The tabs are still intact so it will mount like it should. This gas tank fairing has deep scratches. This gas tank fairing has light scratches. Removed From: 2016 Yamaha YZF R1 — with Unknown miles Please review all pictures to asses the condition of the item. The item “Yamaha Yzf R1 R1m R1s Aftermarket Carbon Fiber Gas Tank Cover Extender E3″ is in sale since Thursday, November 5, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work”. The seller is “bobbleheadmoto” and is located in Falling Waters, West Virginia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Russian federation, Cayman islands.

• Type: gas tank fairing
• Manufacturer Part Number: Does Not Apply
• Brand: AFTERMARKET

]]> https://carbonfibercontainer.com/2020/12/17/yamaha-yzf-r1-r1m-r1s-aftermarket-carbon-fiber-gas-tank-cover-extender-e3/feed/ 0